10
4�
Make the Connections
A�
Connect the three colored tubes (D, E, and F) to the engine
(A).
Operation
Startup and Flushing Water
Flush the filter in the engine (A) upon first use and each time you change the filter.
1�
Open the feed water adapter (B).
2�
Plug the engine (A) into a GFCI outlet. The engine automatically turns on.
3�
Complete the steps in the Dispensing Water section below and allow the water to fill the pitcher (H) at least
three times and until black spots no longer appear in the water before drinking.
Dispensing Water
1�
Before dispensing water, ensure the flip lid (1) on the pitcher (H)
is open, the lid (2) is closed, and that the liquid level sensor in the
lid is in the correct position with the pitcher body groove.
2�
Press the water processing switch/manual water intake button (5)
to turn the water dispensing on and off. When the water is turned
On (the indicator light is on), water dispenses automatically after
you place the pitcher (H) in the base (G).
3�
The water turns off automatically when the pitcher is full.
Removing the pitcher and pressing the water processing switch/
manual water intake button (5) will also turn the water off.
NOTE:
Do not block the liquid level sensor in the lid.
E
F
A
D
1
H
G
5
2
