1019098-B
9
English Manual
ASSEMBLY
NOTE: Leave nuts loose on this step, allowing the End Panels (1) to be adjusted later.
x6
Align an End Panel (1) with
the Aerator Tray (5).
- From beneath, run three 5/16" x 3/4"
Hex Head Screws (
10
) through the tray
and end panel.
- Add a 5/16" Flat Washer (
14
)
to each screw.
- Add three 5/16" Hex Nuts (
12
),
DO NOT TIGHTEN FULLY.
NOTE: These will be adjusted
and secured on Step 4-B.
Repeat on the other
end of the tray (5).
Step 2
12
14
10
1
5
14
12
+
14
12
+
10
10
10
19
17
2
15
2
Slide a Cotter Pin (
19
)
through the end of
the Tine Shaft (
2
). Using
pliers, bend the ends
over to secure the pin
in place.
Place a 5/8" Flat
Washer (
15
) on the
Tine Shaft (
2
) and push
the shaft through one
End Panel (
1
).
19
1
2
15
2
19
1
2
15
2
19
1
2
15
2
Step 3
Add a Square Bearing (
17
) and a 5/8" Flat
Washer (
15
) on the Tine Shaft (
2
) as illustrated.
17
1
17
1
19
1
2
15
2
