Step 13
Press the two raised
points on the back
of the bezel into the
corresponding holes
on the side burner
front panel.
Note:
Align bezel with stop pin
toward bottom as shown.
Step 14
Insert the two screws that are already
attached on the side burner valve
through the corresponding key holes
on the side burner front panel and
bezel, from the back of the side
burner front panel. Depending on the
side burner valve, you will be using
either the outside key holes (Figure 1),
or the inside key holes (Figure 2). Pull
the valve downward or upward to lock
into place. Do not tighten the two
screws at this step.
Step 15
Insert the side burner into burner base
through the top of the side table
(Figure 3) and make sure the side
burner valve inserts into the burner
venturi.
Step 16
Attach side burner igniter lead wire to
the electrode as illustrated.
Side
Burner
Valve
Burner Venturi
Valve
Nozzle
Side Burner
Igniter Lead Wire
Electrode
Figure 1
Figure 2
Figure 3
Stop Pin
27
