6
AFTER-USE SAFETY
•
Always allow the heater to cool completely before handling.
•
When disconnecting propane cylinder, a small amount of LP gas is released until cylinder is completely
removed. Cylinder contains a self-sealing valve.
•
Always disconnect the propane cylinder from heater when not in use - replace cap on the propane
cylinder.
•
Store propane cylinder in a well ventilated area away from any heat source or open flame.
•
Always attach or detach propane cylinder outdoors away from flame, pilot lights or other sources of
ignition and only when appliance is cool to touch.
•
Wipe exposed parts of heater with a dry cloth. Do not use abrasive materials or expose heater to moisture.
•
To protect your heater, the unit must be kept clean, dry and covered at all times when not in use.
•
Repairs should be performed by The Brinkmann Corporation. For parts or repairs, contact The Brinkmann
Corporation’s Customer Service Department at 1-800-527-0717.
•
Cover and store heater in a protected area away from children and pets.
•
After product has been stored and prior to reusing, verify that heater is free from leaves, insects, spider
webs, dirt, etc. as these items can obstruct the flow of combustion air.
•
DO NOT
use if heater is not operating properly.
•
This heater requires an unobstructed airflow to operate correctly.
•
During use or storage, always keep the heater area clear and free of combustible materials, gasoline and
other flammable vapors and liquids.
•
To avoid damage to the catalyst, do not allow pad to come in contact with or around silicone based
products (paints, lubricants, etc.).
PROPER CARE & MAINTENANCE
