30
Descaling: Single Serve
1. Remove the drip tray to accommodate a 15 oz. tumbler.
2. Fill the tumbler with 3 oz. white vinegar and 9 oz. cold water. Pour cleaning solution into
the single serve water tank. Do not add any adaptor.
3. Center the tumbler under the single serve nozzle.
4. Press either the GROUND COFFEE or CAPSULE button to begin descaling.
5. The white HEATING indicator light will begin to flash as the Coffee Maker begins heating
the water
6. When the water has reached the optimal temperature, the heating light will darken and the
white BREWING light will illuminate. Brewed coffee will begin to stream through the nozzle
7. At the end of the cycle, the Coffee Maker and all indicator lights will automatically turn OFF
8. Repeat steps 1 to 7 for three times
9. Following the same procedure, continue to run clean water through the Single serve three
time, or until water is clean and fresh and no residual vinegar odor or flavor remains
10. Unplug the Coffee Maker when not in use
11. Dry parts thoroughly.
Storing Instructions
1. Unplug unit and allow to cool.
2. Never wrap the cord tightly around the appliance. Do not place any stress on the cord
where it enters the unit, as this could cause the cord to fray and break.
3. Store the Trio Multibrew System with the carafe, gold tone filter and one adaptor in place
when storing.
4. Store the Trio Multibrew System in its box or in a cool, dry place.
5. Never store unit while it is still plugged in.
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 30
2019-03-07 1:46 PM
