14
Before Using for the First Time
CAUTION:
To protect against electrical shock, do not immerse the BRIM Trio Multibrew System or
allow power cord to come into contact with water or other liquids.
1. Remove all packing material and labels from the inside and outside of the Coffee Maker.
Place the unit on a flat, clean surface.
2. Before preparing coffee, thoroughly clean the
glass carafe, coffee scoop, removable filter holder,
gold tone coffee filter, and both adaptors in hot,
sudsy water. Rinse and dry.
3. Clean the inside of the Coffee Maker. Fill carafe
with cold tap water and pour into the 12 cup water
tank. (See Figure 4.) Center the empty carafe on the
warming plate. Do not add the gold tone coffee
filter or ground coffee for this initial cleaning.
4. Using any cup as a measure, add a cup of water to
the single serve water tank.
(See Figure 4.)
5. Adjust the drip tray following the detailed
instructions outlined in the Single Serve section of
this instruction manual.
6. Center the empty cup on the single serve drip tray. Do not add any adaptor for this
initial cleaning.
7. Following the detailed instructions outlined in the Carafe Brew Cycle section of this
instruction manual, brew a carafe of clean water.
8. At the end of the first clean water cycle, allow 15 minutes for the unit to cool.
9. Brew a second carafe of fresh water.
10. Following the detailed instructions outlined in the Single Serve Brewing section of this
instruction manual, brew a cup of clean water.
Figure 4
SO-315939_50017 BRIM Trio MultiBrew IM R2.indd 14
2019-03-07 1:46 PM