Brillion Landcommander II LCS11152, Руководство оператора

Страница: 37 / 62

998rev401 5K821
TIGHTENING PROCEDURE FOR 90
o
O-RING FITTINGS
1. INSTALL THE FITTING UNTIL THE METAL
WASHER WHICH BACKS UP THE O-RING
CONTACTS THE FACE OF THE BOSS.
2. THEN ORIENT THE FITTING BY TURNING
COUNTERCLOCKWISE UP TO 1 TURN.
3. TIGHTEN THE LOCK NUT USING 67-81
FOOT POUNDS TORQUE.
TIGHTENING PROCEDURE FOR 37
o
JIC SWIVEL FEMALE NUTS
1. CHECK FLARE AND FLARE SEAT FOR DEFECTS.
2. LUBRICATE THE CONNECTION.
3. INSTALL HOSES WITHOUT TWISTS.
4. HAND TIGHTEN UNTIL CONNECTION BOTTOMS.
5. USING 2 WRENCHES TO PREVENT TWISTING, ROTATE
THE SWIVEL NUT 2 WRENCH FLATS (1/3 TURN).
6. FOR REASSEMBLY, FOLLOW THE SAME PROCEDURE
BUT TIGHTEN ONLY 1 WRENCH FLAT (1/6 TURN).
THESE HOSES ROUTE TO FRONT OF
MACHINE VIA
RIGHT
FRAME TUBE
Figure 26
STRAIGHT ADAPTOR
O-RING & FLARE
5K864
HYDRAULIC CYLINDER
2” X 6”
90
O
FITTING
5K860
HOSE, 64”
5K870
CROSS
5K862
TEE
5K861
HOSE, 170”
5K872
HOSE, 50”
5K869
90
O
FITTING
5K860
HOSE, 170”
5K872
90 O FITTING
5K860
HOSE, 44”
5K868
HOSE, 30”
5K866
ROUTE THESE HOSES DOWN
RIGHT
SIDE OF DRAWBAR
HYDRAULIC CYLINDER
2” X 6”
HYDRAULIC CYLINDER
2” X 6”
4K912
MALE TRACTOR TIP
STROKE CONTROL
SEGMENTS
4J822
Page 31