Brillion Landcommander II LCS11152, Руководство оператора, Страница: 23 / 62

998rev401 5K821
Figure 13
Figure 13A
ROLL PIN,
1/2” X 2”
PIN,
17/16” X 6 3/8”
ROLL PIN,
1/2” X 2”
HOSE
SUPPORT
DRAWBAR
JACK
MACHINE BOLT
1 1/4” X 9 1/2”
LOCK NUT,
1 1/4”
HITCH
SAFETY CHAIN
(SEE FIG. 4)
CAPSCREW
5/8” X 2”
FLAT WASHER
LOCKWASHER,
5/8”
NUT, 5/8”
PIN,
1 3/8” X 10 3/4”
ROLL PIN,
5/16” X 2 1/2”
TURNBUCKLE
GREASE ZERK
END WITH
FLAT
PIN,
17/16” X 6 3/8”
12. Mount drawbar to main frame with 1 7/16 x 6 3/8" pins and 1/2 x 2" roll pins.
Install the hitch with the 1 1/4" x 9 1/2" long machine bolt and locknut.
Attach the hose support with 5/8 x 2" long capscrews, flat washers, lock washers and nuts.
The drawbar jack can also be installed at this time. See Figure 13.
13. The turnbuckle attaches to the drawbar (grease zerk
faces up) with 1 3/8” x 10 3/4” long pin with flat on
one end. The pin extends through the tube on the
turnbuckle sleeve so the the flat is up against the
bar on the drawbar to keep it from turning.
Lock in place with a 5/16” x 2 1/2” long roll pin on the
end with the flat.
Page 17