Brillion Field Commander HFC16, Руководство оператора, инструкции по сборке, Страница: 50 / 64

2K314
16. Options.
A. Front gage wheels - 2K279
1. Front gage wheels are recommended for use on all larger machines.
2. Kit includes brackets, supports, wheels, and hardware.
3. Mount where shown in figures 21, 22, 23, and 24.
B. Rear hitch - 2K280
1. The rear hitch kit includes the hitch weldment and U-bolts necessary to
attach the hitch to the rear of the field cultivator.
2. It is necessary to remove the rear center shank to install the hitch.
3. Extend the front of the hitch weldment between the two lugs on the center
rockshaft and use the U-bolt to attach it to the drawbar. The weldment will
have to be rotated 90 degrees to fit between the lugs. If desired, the
leveling link can be removed from the lugs, and the hitch lowered between
the lugs.
Note: If the leveling link is removed, be sure that there is no weight on the
linkage before removing the pins.
4. Replace the rear center shank after the rear hitch has been installed.
C. Safety chain - 1K822
1. Use of a safety chain is recommended if the machine is towed on a public
road or highway. The chain should be rated at 10,100 pounds minimum
in accordance with ASAE S338 specifications. This kit contains such a
chain, along with the hardware to attach it to the Field Cultivator.
CAUTION If two or more machines are pulled in tandem, a larger chain may be
required. Chain capacity must be greater than the total weight of towed
implements. A second chain should be used between each implement.
CAUTION Replace chain if one or more links are broken, stretched, or otherwise
damaged or deformed.
194rev3-4-05 Page 36