GB
19
.
Connect the shredder only to
properly earthed power points.
.
The connection should be of
rubbersheathed cable, to be
type 05 RN-F minimum, with
a conductor cross section of
1.5 mm
2
(up to 25 m) or
2.5 mm
2
for more than 25 m,
resp. The power point must
be fitted with a shower proof
cover guard.
.
Insert the plug into the power
point only when the unit is
switched off.
.
Do not press the on/off switch
with a sharp or pointed object.
.
Children under 16 and persons
not familiar with the operation
of the shredder should not
operate the unit under any
circumstances.
.
Note that the operator is
responsible for the safety of
third parties within the operat-
ing range of the shredder.
Never operate the shredder
when people are nearby.
.
When using your shredder
always wear strong shoes,
gloves and safety glasses.
(We also recommend to wear
ear protectors when shredding!)
.
Do not wear loose hanging
clothing or clothing with hang-
ing ribbons or cords.
.
Hands, other body parts and
clothing are not to be put into
the filling chamber, discharge
channel or near other moving
parts.
.
Do not transport or tilt the shred-
der while the motor is running.
.
Keep proper footing and
balance at all times.
.
Operate unit only under condi-
tions of sufficient visibility.
.
Always disconnect it from the
mains, prior to working on the
unit.
.
Never remove any safety
devices during operation.
.
Warning:
Rotating cutting
blades.
Do not reach into
ejector funnel.
.
Warning:
Blades continue to
revolve when switched off!
.
Check your fuse protection:
230 V:
16-A (slow blow);
400 V:
10-A (slow blow)
.
380 V – 400 V
(three-phase current model)
Universal-Gartenhäcksler_15236 01.11.2007 15:10 Uhr Seite 19
