Brilix XHP 100, Инструкция по установке и эксплуатации

Страница: 14 / 28

14
7. Setting operating data
7.1 Heating only operation
7.2 Control display functions
1. up and down arrows
2. timer on button
3. timer off button
4. clock button
5. on/off button
6. operating mode display
7. LED display
7.3 How to identify the operating parameters (in the event of switching off the heat
pump, the LED display shows real time)
(1) press the button for 5 seconds and enter the operating parameters interface
(2) in this interface, use the up and down arrows to check the parameters
(3) the temperature of the incoming water (in “on” state) or time (in “off” state) appears on the LED display
after 8 seconds
(4) press the up or down arrows in the current mode to change the water temperature setting both in the on
and off states
(5) if the pump is running, the LED display shows the temperature of the incoming water and the current
mode
7
6
5
1
1
2 3 4
EN