Brigmton BTW-40K, Инструкция по эксплуатации

Страница: 21 / 27

BATTERY PRECAUTIONS:
Follow these the size and type of battery specified.
1. Use only the size and type of battery specified.
2. Be sure the follow the correct polarity when installing the battery as
indicated in the battery compartment. A reversed battery may cause
damage to the device.
3. If the battery in the device is consumed or the device is not to be used for
a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
4. Do not try to recharge the battery not intended to be recharged; it can
overheat and rupture.
5. The batteries shall not be exposed to excessive heat such as sunshine, fire
or the like.
6. Clean the battery contacts and also those of the device prior the battery
installation.
7. Do not mix different types of batteries together (e.g. Alkaline and
Carbon- zine) or old batteries with fresh ones.
AUTOMATIC POWER OFF FUNCTION
The tower speaker will turn to standby mode after 60 minutes if an
external device connecting to LINE in, RCA or BT is disconnected or the
volume is too close to mute.
INSTALLING THE BASE TO THE TOWER
1. Take out the base and a piece of screw Ø10×28mm (supplied).
2. Matches those pillars of the tower (at the bottom) with the appropriate
holes from the base.
3. Screws up with screw Ø10×28mm.
CONNECTING THE MICROPHONE
Insert the microphone plug into MIC JACK 1 and MIC JACK 2.