Brigmton BTW-40K, Инструкция по эксплуатации

Страница: 16 / 27

SAFETY PRECAUTIONS
Power Source
Before plugging in for the first time, read the following section
carefully.
This device should be operated only from a 220-240V AC, 50 Hz outlet.
Be sure that the power supply voltage of the area be used meets the
required voltage and you select the correct voltage setting for your device.
Power Cord
Do not place the set, a piece of furniture, etc on the power cord or pinch
the cord. Handle the power cord by the plug. Do not unplug the appliance
by pulling from the power cord and never touch the power cord with wet
hands as this could cause a short circuit or electric shock.
Never make a knot in the cord or tie it with other cords. The power cord
should be placed in such a way that they are not likely to be stepped on. A
damaged power cord can cause fire or give you an electric shock. When it is
damaged and needs to be replaced, it should be done by qualified
personnel.
Moisture and Water
Do not use this device in a humid and damp place (avoid the bathroom, the
sink in the kitchen, etc). Do not expose this device to rain or water, as this
may be dangerous and do not place objects filled with liquids, such as
flower vases, on top.
If any solid object or liquid falls into the cabinet, unplug the connected
device(s) immediately and have it checked by qualified personnel before
operating it any further.
Cleaning
Before cleaning, unplug this device from the wall outlet. Do not use an
aggressive liquid or aerosol cleaners. Use a soft and dry cloth.
Ventilation
The slots and openings on the device are intended for ventilation and to
ensure reliable operation. To prevent overheating, these opening must not
be blocked or covered in anyway. When installing this unit make sure to
leave space suflcient around the unit to ensure the ventilation to improve
heat radiation.
Do not expose the unit to extreme conditions of heat, cold or moisture.
Heat and Flames
The device should not be placed near to open flames or sources of intense
heat such as an electric heater. Ensure that no open flame sources, such as
candles, are placed on top of the device. Batteries should not be exposed to
excessive heat such as sunshine, fire or the like.
Lightning
In case of storm and lightning or when going on holiday, disconnect the
power cord from the wall outlet.
Replacement Parts
When replacement parts are required, make sure that the service technician
has used replacement parts, which are specified by the manufacturer or
have the same specifications as the original one. Unauthorized
substitutions may result in fire, electrical shock or other hazards. Please
contact the brand or manufacturer that will redirect you to the nearest
technical service which will supply or change the replacement parts
Servicing