Brightlink BLIP-A300TR-P-P, Руководство пользователя

Страница: 27 / 51

BRIGHTLINK 4K IP AV DISTRIBUTION
22
c) Drag and drop the RX (Decoder) you want to configure from the Decoder list.
d) Drag and drop the TX (Encoder) to fill the Multi-View mode.
5.6.2 Create user-defined Multi-view mode.
a) Click the "+NEW" button.
b) Click the "+" to add screen and each screen can be configured.
c) Click the "Confirm" button to save the mode.
5.7 HDMI Audio Routing Tab
IPA routes HDMI audio separately from the video signal, e. g. for routing the audio to
additional or different Receivers (RX).
Exception:
In "Genlock Mode", the HDMI audio follows the video when one or more Receivers
(RX) are joined with one Transmitter (TX) from any of the video routing tabs ("Video
Wall", etc.). Simply put: When an RX device is in "Genlock Mode", it receives both the
HDMI video and the HDMI audio signals from a single source. The same also applies
for all video switching modes, when no separate HDMI audio stream is enabled.
To route the HDMI audio signal, select the tab "HDMI AUDIO ROUTING".
All RX devices are listed in the top half of the Receiver (RX) section. Similarly, all TX
devices are listed in the bottom half in the Transmitter (TX) section.
First, verify if appropriate TX and RX units are joined together to route their HDMI audio
signal:
1) Verify, if the Receiver (RX) is currently joined to an appropriate Transmitter (TX).
a) Click on the RX to highlight the TX it is joined to in blue.