Brightline Stealth-T, Руководство по эксплуатации и установке

Страница: 2 / 14

2
Model No.________________________
Serial No.________________________
Date of Purchase__________________
• The serial number of this product can be found on the top of the ballast cover. You should note
the model number and the serial number in the space provided and retain this book for future
reference as a permanent record of your purchase.
Safety
Owner’s Record
Product Description
• Fixture installation should be performed in accordance with local and national codes. All fixtures must be
properly grounded.
• To prevent fire or electric shock, do not expose the fixtures to water or moisture. Stealth-T fixtures are listed for
indoor use only.
• Do not attempt to dim a non-dim fixture. Do not attempt to operate a fixture without lamps installed, as this
could damage the ballast.
• Do not attempt to change the lamps on a fixture that is energized, or to work with your hands near an exposed
socket that is energized.
• A qualified technician should perform service on fixtures. Do not remove the ballast cover until the unit has
been de-energized.
• In case of lamp failure:
1. Turn the fixture power off.
2. Wait 30 seconds for the ballast to reset.
3. Install the new lamp(s).
4. Turn the fixture back on.
Stealth-T Fixtures
Two-lamp, glare-free videoconference lighting fixtures, ideal
for distance-learning and telepresence applications. Available
with four louver types: Forward Throw, Corner Throw, Bidirectional
Throw, or Downward Throw. Multiple ballast types available.
Forward-Throw Louvers
Corner-Throw Louvers Bidirectional-Throw Louvers Downward-Throw Louvers
Brightline fixtures are not Insulated Ceiling (IC) rated. Maintain the proper distance from insulation. Brightline fixtures are not Insulated Ceiling (IC) rated. Maintain the proper distance from insulation.
• Brightline fixtures are not Insulated Ceiling (IC) rated. Maintain the proper distance from insulation.