Briggs & Stratton 30380 Скачать руководство пользователя страница 16

Страница: 16 / 52

BRIGGSandSTRATTON.COM

Maintenance

Maintenance Schedule

Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.

Service more often under dirty or dusty conditions.

General Recommendations

Regular maintenance will improve the performance and
extend the life of the generator. See an authorized dealer for
service.

The generator’s warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain the
generator as instructed in this manual.

Some adjustments will need to be made periodically to
properly maintain your generator.

All service and adjustments should be made at least once
each season. Follow the requirements in the Maintenance
Schedule chart above.

NOTE:

Once a year you should clean or replace the spark

plug and replace the air filter. A new spark plug and clean air
filter assure proper fuel-air mixture and help your engine run
better and last longer.

Emissions Control

Maintenance, replacement, or repair of the emissions
control devices and systems may be performed by any
non-road engine repair establishment or individual.

However, to obtain ”no charge” emissions control service,
the work must be performed by a factory authorized dealer.
See the

Emissions Warranty

Generator Maintenance

Generator maintenance consists of keeping the unit clean
and dry. Operate and store the unit in a clean dry
environment where it will not be exposed to excessive dust,
dirt, moisture, or any corrosive vapors. Cooling air slots in
the generator must not become clogged with snow, leaves,
or any other foreign material.

NOTE:

DO NOT use water or other liquids to clean generator.

Liquids can enter engine fuel system, causing poor
performance and/or failure to occur. In addition, if liquid
enters generator through cooling air slots, some of the liquid
will be retained in voids and cracks of the rotor and stator
winding insulation. Liquid and dirt buildup on the generator
internal windings will eventually decrease the insulation
resistance of these windings.

Cleaning

Daily or before use, look around and underneath the
generator for signs of oil or fuel leaks. Clean accumulated
debris from inside and outside the generator. Keep the
linkage, spring and other engine controls clean. Inspect
cooling air slots and openings on generator. These openings
must be kept clean and unobstructed.

Engine parts should be kept clean to reduce the risk of
overheating and ignition of accumulated debris:

• Use a damp cloth to wipe exterior surfaces clean.

• Use a soft bristle brush to loosen caked on dirt or oil.

• Use a vacuum cleaner to pick up loose dirt and debris.

Battery Maintenance

Other than float charging, described elsewhere, no
maintenance is required for the starting battery. Keep the
battery and terminals clean and dry.

IMPORTANT:

Battery charging should be performed in a dry

location, such as inside a garage.

NOTICE

Improper treatment of generator can damage it and
shorten its life.

• DO NOT expose generator to excessive moisture, dust, dirt, or