Briggs & Stratton 1697363A-00, Руководство оператора

Страница: 4 / 12

4 briggsandstratton.com
WARNING
Thrown Objects Hazard
Do not open the cover while the blades are turning.
• Check the catcher system to make sure it is bolted
tightly to the unit.
• Catcher bags are subject to deterioration and wear
during normal use. Inspect the bag periodically for
tears, holes, or weak spots and replace with a new bag
that meets manufacturer’s durability standards.
WARNING
Loss of Control, Roll-over and Tipping Hazard
• Use reduced speed on uneven ground and when
turning corners.
• Reduce loads on hillsides. It is recommended that the
catcher system be kept only half full when mowing any
slope. Start mowing on slopes when the catcher system
is empty.
• Mow on the face of slopes as directed in the operator’s
manual and safety warnings on the product.
• Never operate on slopes greater than 17.6% (10°).
• Select a slow ground speed before driving onto a slope.
Avoid using brakes to control speed.
• Use caution when changing directions and DO NOT
start or stop the rider while on a slope.
Safety Decals - Triple C atche r
Before operating the grass catcher, read and understand the
installed safety decals. The decals are provided to help you
avoid personal injury or damage to the product.
If any safety decals become damaged or illegible, order
replacements from your local authorized dealer. See Figure 1.
1
Callout Hazard Description
1 Thrown Object Hazard
Do not open the catche r while the mower blades are
turning.
Do not operate the mower without the complete grass
c atche r in place. Keep bystanders and children a safe
distance.
Callout Hazard Part Number
A Thrown Objects Hazard 7104709
Hardware and Parts - Grass
Catcher
See Figure 2.
CALL
OUT
DESCRIPTION SPECIFICATION QTY.
A SIDE PLATE - 2
B CAPSCREW .375”-16 x 1.00” 4
C LOCK NUT, Flange .375”-16 4
D CAPSCREW .50”-13 x 2.50” 4
E WASHER .531” ID x 1.25” OD x .08” THK 4
F SPACER .52” ID x .73" OD x 1.27" 4
G NUT, Nylock .50”-13 4
H CARRIAGE BOLT .375”-16 x 1.0" 4
I FLANGE NUT,
Whiz-Lock
.375”-18 4
J COVER HINGE PIN - 2
K HAIR PIN - 2
L CROSS SUPPORT - 1
M COVER ASSEMBLY - 1
N CATCHER BAG
-
3
O UPRIGHT SUPPORT
ASSEMBLY
- 1
Refer to the chart for the callouts, descriptions, specifications
and quantities.
Not for
Reproduction