Brigade MDR-504-500, Инструкция по установке и эксплуатации

Страница: 80 / 92

80
14.3 Sub-Stream Recording Parameters
The following table is valid for both the MDR-504xx-500 using all 4 channels and MDR-508xx-1000 using all 8 channels. It illustrates
approximate SD recording times in hours at CIF resolution and different frame rates. Ranges of frame rates are controlled by the sub-stream
bandwidth.
Bandwidth 4096 Kbps 3200 Kbps 1500 Kbps 500 Kbps
Recording Time
onto SD (hours)
depending on
frame rate
25 fps (fastest) 12
20 fps 15
15 fps 20
10 fps 29
5 fps 60
1 fps (slowest) 305
Note: Sub-stream and Mainstream recording onto SD card has resource limitations, the maximum bitrate is 12Mbps.
Please calculate using the following steps:
PAL: Actual Bit Rate = Actual framerate / 25 * Bit Rate (Full framerate) * transfer ratio
Transfer Ratio: Framerate(1-5):1.4; Framerate(6-11):1.3; Framerate(12-17):1.2; Framerate(18-22):1.1; Framerate(23-25):1.0
NTSC: Actual Bit Rate = Actual framerate / 30 * Bit Rate(Full framerate) * transfer ratio
Transfer Ratio: Framerate(1-6):1.4; Framerate(7-14):1.3; Framerate(15-21):1.2; Framerate(22-27):1.1; Framerate(28-30):1.0
14.4 User Log Description
Reason Example Description
MDR Ignition 08:48:16 Power on MDR powers on
10:06:53 Ignition off
10:06:57 The host power down MDR shuts down
10:10:19 Low Voltage Protect reboot down
15:28:51 Restart Auto Restart
22:30:55 Upgrade
22:33:43 Host upgrade reboot Reboot after upgrade
MDR Info 08:48:23 Firmware version:MDR-504_V231_T170401.01 MCU
version:T17010901
MDR Recording 08:48:25 Chn1 Main Record Open
08:48:25 Chn2 Main Record Open
08:48:25 Chn1 Sub Record Open
08:48:25 Chn2 Sub Record Open
11:04:45 Chn3 Main Record Close
11:04:45 Chn3 Sub Record Close
MDR Login 08:49:27 Local user login Device login Means use device to operate
08:56:21 Local user logout Device login
MDR Setup Changed 08:50:53 Rec Search Device login
08:50:15 Save configuration Basic Setup->Network->Server Device login
09:10:07 Save configuration Alarms->General->IO Alarm Device login
10:05:13 Save configuration Events->General->Peripherals Device login
10:12:37 Save configuration Alarms->General->Panic Alarm Device login
10:30:13 Local backup Device login Video name:20170512000000
–
20170512000025
Export Footage
10:34:59 Save configuration Alarms->Advanced->G-Force Device login
10:35:34 Save configuration Events->Snapshots->IO Snap Device login
11:42:13 Save configuration Basic Setup->Power->Voltage Device login
14:25:51 Log Search Device login
15:21:40 Local playback Device login Video name:20170512120935 -
20170512120936
15:28:50 Save configuration Video Format Device login Change from PAL to NTSC or vice versa
15:35:00 Reset settings Device login
00:47:21 Format disk Device login
03:58:23 Modify recording settings Device login Channel:1 Main
stream:D1->720P Frame rate:25->30
03:23:22 IPC05 online When you connect an IPC
18:54:21 Timer off Ignition mode: Timer, and time up
Alarms 11:04:41 Chn3 Video Loss
11:35:19 The host power down When voltage goes too low
11:43:30 Low voltage off Voltage goes up at normal level and
cancel the low voltage alarm
08:44:52 08:45:04 Channel1motion
09:10:07 09:11:15 IO1 Li
10:04:55 10:05:05 ACC Y Direction
11:31:54 11:32:06 panel
11:42:54 11:42:54 Low Voltage alarm
MDR-Dashboard 5.0
Remote Control 08:53:36 Remote live video Channel1Sub-stream 20170512085311
–
20170512085336
08:52:23 Download record Remote user login 20170511230000
–
20170511230100
Remote Operation
09:02:25 Auto download sleep When multiple tasks are downloading,
some devices need to wait
03:03:38 Enter Polygon Area [(1)] Geo-fence function
03:45:22 Exit Polygon Area [(1)] Geo-fence function