Briel motormaher Brielmaier, Руководство по эксплуатации

Страница: 28 / 32

The valves 2.1 and 2.2. are behind the cooler. By
opening of the valves 2.1 and 2.2 and by unlocking
the wheel brake cylinder, the machine can be
moved easily by hand if the motor is off.
Unlocking of the wheel brake cylinder on the
left and on the right side:
Remove the plastic cover of the wheel brake
cylinder, take the hex screw from tool
compartment and screw it in the piston rod of the
wheel brake cylinder and then, by screwing in of
the hex nut, draw the piston rod back until
abutment.
The control bar of the Brielmaier motor mower
can be adjusted vertically and horizontally; and
for this purpose, proceed as follows:
• Hold onto the bar with the right hand
• Use the left hand to turn the bar with approx.
2 turnings to the desired adjustment position
• Use the right hand to bring the control bar into
the desired position – up/down or to the right/to
the left
•
Pay attention that the teeth engage at the
adjustment device and do not come up on-
top of each other
• Finally screw-tight the control bar again
Hydraulic valves, battery and adjustable control bar
26
2.1 2.2
CAUTION! The machine is not designed for
towing since in such a case, the oil does not flow
via the cooler!
The battery is also packed into the tooling
compartment. The battery must be charged with
max. 1 ampere (charging current)!
Tooling compartment and battery housing