TM
GE60 Installation Manual
580-00505, rev 0.4
16 of 30
PRELIMINARY
3.5 Radio Mount Installation
Wall Mounting
1.
Install 4 mounting bolts in the wall at the desired location using the template
provided (see Figure 3-4 below). The bolts (normally
⅜
-16) should extend 0.8 to
3.0 inches (2cm to 7.5cm) from the wall and be strong enough to secure the radio to
the wall under foreseeable environmental conditions. The environmental conditions
may include, but not limited to, wind, rain, ice, etc. Depending on the wall material
the mount is being attached to, a different size bolt may be appropriate. In this case,
bolts up to ¾ inch in diameter may be used.
2.
Secure the mount to the bolts using the appropriate sized nuts, lock washers, and
flat washers for the bolts used to mount the bracket.
Figure 3-1: Mount in ‘Wall Mount’ Configuration
