Copyright © Bridgetek Pte Ltd
7
PanLHub44/80 Datasheet
Version 1.0
Document Reference No.: BRT_000277 Clearance No.: BRT#146
4
FCC Statements
PanLHub44/80 device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) These devices may not cause harmful interference, and
(2) These devices must accept any interference received, including interference that may cause
undesired operation.
NOTE:
The equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a building installation. These equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If the equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, at least
20cm of separation distance between
the PanLHub44/80 device and the user's body must be maintained at all times.
