Bridge BriPower ESA Series, Руководство пользователя

Страница: 34 / 112

2.2 Equipment Installation
2.2.1 Selection of input/output cables
Before the equipment is installed, the user should confirm the model on the nameplate, select
the appropriate specifications of the cable and the cold end according to the equipment
input/output voltage level and current of the equipment, and crimp the input side cable and
the output side cable.
Figure 2-1 Cold-pressed terminals
WARNNING
If the equipment is disassembled and installed at a low temperature, water
droplets may condense. The cabinet must be dry completely before installing the
product, otherwise, there is a risk of electrical hazards and damage to the product.
2.2.2 Installation steps
Step 1:
Remove the bottom baffle (as shown in Figure 2-2), Lead the PE, N, A, B, and C cables on the
input side and N, A, B, and C cables on the output side into the cabinet through the cable
etrancehole at the bottom of the cabinet (as shown in Figure 2-3).
Figure 2-2 bottom baffle. Figure 2-3 Entrance hole