52
7.4.4. The races.
Here you can change the race data.
7.4.4.1. Add races.
Here you can add races.
Follow the next steps:
MASTER’s DISPLAY
Basketing
Read out
Pre-Read out
>Other functions
Press the "
↓
" key until you get the
following display. Press <OK>.
PCComm. without EC
PCComm. with EC
Set / Read Time
>Other functions
Press the "
↓
" key until you get the
following display. Press <OK>.
Device setup
Printing
Antenna – options
>Races
Press the "
↓
" key until you get the
following display. Press <OK>.
>Add races
View races
Delete races
Couple races
Press the "
↓
" key until you get the
following display. Press <OK>.
Give the name :
NEW RACE
Enter the name of the race. You can do so
by means of the arrows. The vertical
arrows are used for scrolling from a to z,
the horizontal arrows are used for jumping
to the next/previous character
Name :
NEW RACE
Add?
<C>NO <OK>YES
The name of the race should comprise at
least 4 characters. Press <OK> to confirm
the adding.
Name : NEW RACE
Add badge?
<C>NO <OK>YES
Press <OK> to couple a badge to the new
added race.