BrickElectric BEM105, Руководство пользователя

Страница: 17 / 40

www.BrickElectric.com
http://192.168.1.105/pwenable=1
Socket command text:
pwenable =1;
To Disable password protection, you need also firstly input correct password:
Web access URL:
http://192.168.1.105/ pw=123456&pwenable=0
Socket command text:
pw=123456&pwenable=0;
Change Password
To change password to "abcdef", you need also firstly input previous correct password:
Web access URL:
http://192.168.1.105/ pw=123456&newpw=abcdef
Socket command text:
pw=123456&newpw=abcdef;
4.7 Http port setting
In default conditions, HTTP port is always 80 if you enter directly in web browser a URL
without any additional parameters. But in some applications different port number is
needed for port forwarding or any other reasons. For example, you can force your web
browser to access http content at port 8080, to do so you need to enter http://url:8080.
This module is able to customize http access port to realize such functions. In the
following contents, assuming current IP Address is 192.168.1.105.
Change Http Port
To change http port to 8080:
Web access URL:
http://192.168.1.105/webport=8080
Socket command text:
webport=8080;
4.8 Hardware reset button
Hardware reset button is used for situations when you want to reset the device to factory
settings. For example, if you set incorrect IP Address and the device is no longer
detectable in your network. Two different level of reset are provided in this module.
Level-1 only reset parameters, i.e. network settings, time settings and so on, while Level-2
will reset on-chip app, i.e. for firmware updating/reload.