Brickcom WAP-350N, Руководство пользователя, Страница: 52 / 52

49
•
User Name—Enter the name based on the security level selected.
• Authentication Password —Enter the password for authentication based on the
security level selected.
• Privacy Password—Enter the password for authentication based on the security level
selected.
•
Get Community—Enter the password that allows read-only access to the access
point’s SNMP information.
•
Set Community— Enter the password that allows read/write access to the access
point’s SNMP information.
•
SNMP Trap-Community— Enter the password required by the remote host computer
that will receive trap messages or notices sent by the access point.
• SNMP Trusted Host— You can restrict access to the access point’s SNMP information
by IP address. Enter the IP address in the field provided. If this field is left blank, then
access is permitted from any IP address.
•
SNMP Trap-Receiver 1— Enter the first IP address of the remote host computer that
will receive the trap messages.
•
SNMP Trap-Receiver 2—Enter the second IP address of the remote host computer
that will receive the trap messages.
3. Click Save.