Brickcom WAP-350N, Руководство пользователя, Страница: 15 / 52

12
- Packets Transmitted—The number of packets transmitted.
- Byte Received (Octets)—The number of bytes received.
- Byte Transmitted (Octets)—The number of bytes transmitted.
- Received Error—The error number of bytes received.
- Transmit Error—The error number of bytes transmitted.
2. To update the status information, click Refresh.
Checking TCP/UDP Services
The TCP/UDP Services page displays the access point’s current status information for the
local network.
To check TCP/UDP Services status, follow these steps:
1. Click Status and Statistics > TCP/UDP Services.
This page displays the TCP/UDP Services information of your access point:
• TCP Service Table
- Service Name—The name used for the service.
- Type—The protocol used for the service.
- Local IP Address—The IP address of the service.
- Local Port —The local port number of the service.
- Remote IP Address —The remote IP address of the service.
- Remote Port —The remote port number of the service.
- State —The current status (e.g., listen, established) of the service.
• UDP Service Table
- Service Name—The setting configured in Administration > Discovery for the service.
- Type—The protocol used for the service.
- Local IP Address—The IP address of the service.
- Local Port —The local port number of the service.
- Application Instance —The number for the examples of application.
2. To update the status information, click Refresh.