Brickcom WAP-350N, Руководство пользователя, Страница: 20 / 52

17
acquire its IP address from a DHCP server. Follow your organization’s policy when
assigning this name.
- Management VLAN ID—Enter the device name for the access point.
This name is identification purposes only. Unique, memorable names are helpful,
especially if you are deploying multiple access points on the same network. This
name helps you identify the access point after you log in.
- Untagged VLAN —Check this box to enable this function.
- Default VLAN ID —Enter the VLAN ID for the access point.
• Network Setup for IPv4
- Connection Type —Select DHCP or Static IP Address as the connection type.
- IP Address—The access point’s IP address as it appears on your local
network.
- Subnet Mask—The access point’s subnet mask.
- Default Gateway —The access point’s default gateway address.
- DNS-1 —The access point’s primary DNS server address.
- DNS-2—The access point’s secondary DNS server address.
• Network Setup for IPv6
- IPv6 Admin Mode — Select Enable to enable IPv6 for your access point.
- Connection Type — Select DHCP or Static IP Address as the connection type.
- Static IPv6 Address—The access point’s IP address as it appears on your local
network.
- Static IPv6 Address Prefix Length— Enter the prefix length for IPv6.
- Default IPv6 Gateway —The access point’s default IPv6 gateway address.
- DNS-1 —The access point’s primary DNS server address.
- DNS-2—The access point’s secondary DNS server address.
3. Click Save.