7
Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the
specs of UTP Category 5 and not exceed 100 meters in length.
When powering up, the power LED will light up and the camera will boot up. The link LED will be an illuminate
as amber when obtaining the IP address. After obtaining the IP address, the link LED will flash orange while
the network connection is processing.
ii) Power over Ethernet (PoE) Connection
The Fixed Box is PoE compliant, so there are two options for connecting the camera to a power and Ethernet
source. The camera can either be connected to a PoE-enabled switch or a non-PoE switch.
A. If using a PoE-enabled switch:
1.
Use a single Ethernet cable to connect the camera to the PoE-enabled switch.
B. If using a non-PoE switch: