Operation and Safety Manual
™
Model TJ/TS Mincer
Overview
This Operation and Safety Manual has been prepared to introduce you to the Brice Model
TJ/TS Mincers. It explains the operation, cleaning and maintenance of the mincers in
simple, clear terms and with an emphasis on your safety.
A word to the wise
Make sure that you read this Manual carefully so that you are familiar with the features and
procedures that are unique to the mincer that came with it.
How this Manual is arranged
This Manual is made up of four sections:
•
Introduction - which explains the Manual, itself, safety issues associated with using a
mincers, gives a brief introduction to the features and components of the mincers and
steps you through the installation of the machine;
•
Operation - explains the use of the mincers, including pre-operational checks;
•
Cleaning - explains the procedures for keeping the mincers clean;
•
Maintenance & Troubleshooting - details those procedures that you can perform to
ensure the trouble-free operation of the mincers, and some malfunctions and how to
fix them.
Conventions and Symbols used in this Manual
To reduce confusion, and to highlight important points and safety matters, we have
established some standard symbols:
•
The
Special Note
flag
This is an upside-down triangle with an exclamation mark inside it. It appears in the left
margin of the page, like this, whenever we want to draw your attention to an important
point.
•
The “
No Hands
” warning flag
This is a circle with the outline of a hand and a black bar through the hand. It appears
wherever we want to warn you that either: you shouldn’t put your hands in or near a
particular component; or that you must wear steel mesh protective gloves to carry out
a particular procedure.
•
The “
Power
” warning flags
There are two power warning flags. The first, a lightning bolt inside an upside-down
triangle, is used whenever we want to remind and warn you that the mincer is con-
nected to the mains power supply. The second warning flag is a circle with the outline
of a lighting bolt and a black bar through the bolt. It appears to remind you that a
particular procedure must be carried out with the power to the mincer turned off at the
powerpoint.
Introduction
Introduction 1.1
