Bricasti Design M7 Owner's manual, Руководство пользователя

Страница: 5 / 44

Important Safety Instructions
Notice!
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow these instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block ventilation openings;
install in accordance with
manufacturer’s instructions.
•
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers, pre amps, tube
compressors) that produce heat.
•
Do not defeat the safety purpose of the
polarized or grounded type plug. A
polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade and
prong are for your safety. If the
provided plug does not fit in your
outlet, consult an electrician for
replacement of the obsolete outlet.
•
Protect power cord from being walked
on or pinched.
•
Use only attachments/accessories
specified by the manufacturer.
•
Unplug this apparatus during lightning
storms or when unused for long
periods of time.
•
Refer all servicing to qualified service
personnel. Service is required when
the apparatus has been damaged in
any way, such as by being dropped,
exposed to rain, liquid being spilled
on it, or otherwise does not operate
normally.
Service
•
There are no user serviceable parts
inside.
•
All service must be performed by
qualified personnel.
Warning!
•
To reduce the risk of fire or electrical
shock do not expose this equipment to
dripping or splashing water and ensure
that no objects such as vases are
placed on the equipment.
•
This apparatus must be earthed.
•
This equipment requires the correct
AC line voltage as set by the
manufacture and is not auto sensing.
•
Use a three-wire grounding-type line
cord like the one supplied with this
product.
•
Be aware that different operating
voltages require the use of different
types of line cords and attachment
plugs.
•
Check the voltage in your area and use
the correct type. See table below:
Voltage Line plug standard
110-125V UL817 and CSA C22.2 no 42
220-230V CEE 7 page VII, SR section
107-2-D1/IEC 83 pg C4
240V BS 1363 of 1984
Specification for 13A fused
plugs and switched and
unswitched outlet plugs
•
This equipment should be installed
near the socket outlet and
disconnection of the device should be
easily accessible.
•
To completely disconnect from AC
mains, disconnect the power supply
cord from the AC receptacle.
•
Do not install in a confined space.
•
Do not open the unit -risk of electrical
shock inside.
Caution
•
You are cautioned that any change or
modification not expressly approved
in this manual could void your
authority to operate this equipment.
iii