Bricasti Design M7 Owner's manual, Руководство пользователя

Страница: 34 / 44

The Reverb Parameters
•
Reverb LF RT MPY:
Control Range: .2 – 4.0 x
Sets the low frequency reverb time below the crossover frequency set by the Reverb LF
XOVER control. Displayed and controlled as a scaling of the Reverb Time control.
•
Reverb LF XOVER:
Control Range:
80 Hz – 4.8 kHz
Sets the crossover frequency used by the Reverb LF RT MPY control.
•
Reverb VLF Cut
:
Control Range: 0 – -18 dB
Cuts the very low frequency content of the initial part of both the early and late reverberant
fields.
•
Early/Reverb Mix:
Control Range:
0-20 / 0-20
Sets the balance between the early and later parts the reverberant fields.
•
Early Rolloff:
Control Range:
80 Hz – 20 kHz
Sets the rolloff frequency point of the low pass filter for the early part of the reverberant field.
•
Early Select:
Control Range:
0 – 20
Controls the build up and decay characteristics of the early part of the reverberant field.
Table of all user reverb parameters as they appear in the menu:
Reverb Time Size Pre Delay Diffusion Density
Modulation Rolloff HF RT
Multiply
HF RT
Crossover LF RT
Multiply
LF RT Crossover VLF Cut Early/Reverb
Mix Early Rolloff Early Select
3-3