Brew Monk 057.700.30, Инструкция по эксплуатации

Страница: 28 / 134

28
EN - Instruction Manual Brew Monk
• The blue valve, on the circulation pipe, in horizontal position closes the ball valve. The blue
valve, on the circulation pipe, in vertical position opens the ball valve.
• Switch off the pump when you close the blue valve for longer than 5 seconds.
• Always close the blue valve and switch off the pump before removing the curved pipe (11).
• Do not run the pump during wort boiling.
• It is not recommended to use the pump for pumping the wort after cooling, as there is no
filter on the pump inlet. This can cause brew debris to enter the pump, potentially blocking
and damaging the system.
2.2 Bazooka Filter Assembly
Attach the bazooka filter (12) on the male thread inside the Brew Monk using the connector and
screw the bazooka filter on (see pictures below).
2.3 Overflow Pipe Assembly
2.3.1 Malt Pipe Assembly Outside the Brew Monk
Step 1
Place male thread connector
(H) through bottom malt
screen (B) and attach with
1 double female thread
connector (F).
1 x top malt screen (1 centre
hole + 2 small holes)
1 x reinforced bottom malt
screen (1 centre hole)
2 x handle
1 x nut
1 x telescopic overflow pipe
A
B
E
C
D
A
C D E
B