9
Burst of steam
Your iron must be set to either
lll
or MAX. Wait several seconds between each press of
the steam button.
Press the shot of steam button whenever you have a stubborn crease that needs extra
steam. Steam will burst from the holes in the soleplate of your iron into the fabric.
Vertical steam ironing
Never iron garments when they are being worn.
Your iron can be used for vertical steam ironing curtains, dresses on hangers etc.
1. Fill your iron with water.
2. Plug your iron into the mains supply and switch on.
3. Use the +/- buttons to select the
lll
or MAX setting. The hotter your iron, the more
steam is generated.
4. When the
lll
or MAX light stops flashing, your iron is at the correct temperature
and ready to use. During use, the
lll
or MAX light will flash periodically as your iron
maintains the selected temperature.
5. Hold your iron 15cm (6 inches) from the fabric.
6. Press the shot of steam button. The steam will penetrate the fabric removing the
creases. To apply more steam press the shot of steam button again. Wait several
seconds between each press of the button.
Spraying
The spray function will only operate when there is water in the water tank.
1.
The water spray can be used to help iron heavy fabrics or difficult areas (collars,
pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics
which cannot be steam ironed.
2. Simply press the button as required to produce a spray of water. If the spray is being
used for the first time, or if the iron has been standing for some time, you may need
to press the spray button a few times before it works correctly.
using your iron
Содержание VIN239
Страница 1: ......
Страница 16: ...VIN239_Iss2 09 12 93332 1 ...