Breville VFP009, Руководство пользователя

Страница: 20 / 52

0
the slicing, shredding and grating blades
what they’re for
The blades supplied with your Intelligent Food Processor can be used to slice, grate or shred a
variety of ingredients.
fitting
The blades are very sharp! Take care when handling or cleaning them.
If the blender jug is fitted on the base unit, remove it and install the safety cap.
Lower the processor bowl over the drive shaft, ensuring the symbol on the bowl is aligned
with the symbol on the processor base.
Rotate the processor bowl clockwise until the symbol on the bowl is aligned with the
symbol on the processor base.
Fit the blade into the blade holder. Insert the end of the blade with the lug on it into the blade
holder then press the opposite side of the blade downwards until it clicks into place.
Slide the large spindle over the drive shaft in the processor bowl. You may need to turn the
spindle until it drops all the way down onto the drive shaft.
Fit the blade holder and blade onto the large spindle. Make sure that the blade is uppermost
and that the blade holder has moved down as far as it can go.
Lower the bowl lid onto the processor bowl ensuring the symbol on the top rim of the
bowl is aligned with the line on the bowl lid.
Rotate the bowl lid clockwise until the line on the bowl lid is aligned with the symbol on the
top rim of the processor bowl.
using
For the processor to operate, the processor bowl, lid and safety cap must be correctly fitted.
Place the ingredients into the feed tube. Press the Slice/Chop button. Use the pusher to exert an
even pressure onto the food as it is processed by the blade (
8
). For processing smaller items,
leave the large food pusher in place in the feed tube and remove the small food pusher. Insert the
ingredients and use the small food pusher to exert even pressure as the food is processed (
9
).
Always use a food pusher to push food down the feed tube. Never use your fingers
or any other kind of implement.
cleaning
It’s best to clean your processor as soon as you have finished using it. Empty the contents of the
processor bowl, remove the blade holder/large spindle, refit the bowl to the base unit and:
A Fill the processor bowl a quarter full with warm water and add one drop of washing up liquid.
B Refit the processor lid and press the pulse button for a few seconds. Remove the bowl and lid
and rinse under clean running water.
C Remove the blade from the blade holder by pushing upwards at the point indicated on the
blade. Carefully wash the blade and holder in warm, soapy water. Dry the processor bowl,
lid, blade and blade holder with a soft cloth.
1.
.
.
4.
5.
6.
.