23
You can easily reset all settings to the
factory defaults.
Restore All Default Settings
- The machine is on and in the READY
state.
- Press & hold the & all 3 EXTRACTION
BUTTONS at the same time for 4
seconds.
- The machine will beep and the ,
EXTRACTION BUTTONS & DIAL
LIGHTS will all flash together three
times.
- All default settings have been restored.
- The machine will return to the READY
state.
CUSTOMISABLE - EXTRACTION PRE-INFUSION PROFILE
RESTORE ALL DEFAULT SETTINGS
You can select from three Pre-infusion
Profiles to cater for personal preferences.
-
Gentle Pre-infusion:
Small defined
amounts of water are introduced into
the tamped coffee grinds, gently adding
moisture to bloom the coffee grinds in
preparation for a steady water flow. For
a balanced tasting espresso.This is the
default profile setting.
-
Distinct Pre-infusion:
A single distinct
dose of water is released into the
tamped coffee grinds, followed by a brief
rest period, then a steady water flow. For
a more bright tasting espresso.
-
Constant Pre-infusion:
Delivers a
constant, steady water flow from start
to finish. For a more sharp tasting
espresso.
• Access Pre-infusion Custom Mode
-
The machine is ON and in the READY
state.
-
Simultaneously press & hold the ,
ONE & TWO CUP BUTTONS for 4
seconds. The machine will beep and
the LIGHT begins to flash.
• Selecting Pre-infusion Profiles
The EXTRACTION LIGHT illuminated
signals the Pre-infusion Profile selected.
The default setting is:
-
Gentle
=
BUTTON.
The
LIGHT is illuminated.
- To select a Pre-infusion Profile press:
-
Distinct
=
BUTTON.
The
LIGHT will illuminate.
-
Constant
=
BUTTON.
The
LIGHT will illuminate.
• Confirm Pre-infusion Profile
-
Press the BUTTON to save your
selection. The machine will beep & exit
the custom mode.
-
The machine will return to the READY
state.
PRESS & HOLD TOGETHER 4 SEC
PRESS & HOLD TOGETHER 4 SEC
