42
43
tRoUBLEShootInG
PRoBLEM
PoSSIBLE CAUSE
WhAt to do
Motor starts but no ground
coffee coming from
grind outlet
•
No coffee beans in bean
hopper.
•
Grinder/bean hopper
is blocked.
•
Coffee bean may have
become stuck in hopper.
•
Fill bean hopper with
fresh coffee beans.
•
Remove bean hopper.
Inspect bean hopper
& grinding burrs for
blockage. Replace parts
and try again.
Motor starts but operates
with a loud ‘racket’ noise
•
Grinder is blocked
with foreign item or chute
is blocked.
•
Moisture clogging
grinder.
•
Remove bean hopper,
inspect burrs & remove
any foreign body.
•
Clean the burrs and grind
outlet, see page 35.
•
Leave burrs to dry
thoroughly before
re-assembling. It is
possible to use a hair
dryer to blow air into the
burr area to quicken the
drying process.
Unable to lock bean
hopper into position
•
Coffee beans obstructing
bean hopper locking
device.
•
Remove bean hopper.
Clear coffee beans
from top of burrs.
Re-lock bean hopper
into position.
Portafilter overfills
•
Tamping fan was
removed for cleaning and
not replaced.
•
Check that the tamping
fan is in position and
mounted correctly to
the drive shaft, see
page 35.
Emergency stop?
•
Rotate the portafilter to
the left to stop
the auto grind, dose &
tamp function.
•
Unplug power cord
from power outlet.
there is an alert on the
LCd eg. 'ovERhEAt
PLEASE WAIt',
'hEAtInG' etc.
See page 25 & 26 for list
of alerts.
If problem persists,
contact Breville
Consumer Support.
tRoUBLEShootInG
