Breville the Big Easy BMO234, Инструкция

Страница: 14 / 28

14
TIPS ON DEFROSTING
• Before defrosting meat, remove the freezer
bag or wrap to prevent meat sitting in ‘drip’,
which will otherwise boil as the meat defrosts
causing meat to go grey and begin to stew. "
To remove frozen meat from freezer
wrappings, defrost for a few minutes so the
wrap is easy to remove.
• Remove meat from Styrofoam tray, as they
are not microwave safe.
• Place meat onto a rack with a drip tray
to catch juices. Alternatively, place onto
a microwave safe plate that is lined with
absorbent paper and elevate on an upturned
bowl or cup.
• Refer to your user manual for its preferred
setting and timing.
• Check the meat throughout the defrosting
time. As outer portions of meat thaw, remove
them from the microwave. If the edges of
meat feel warm, stop microwaving and allow
meat to stand for a few minutes or until edges
are cold again.
• After defrosting the meat it must be cooked
right away. Don’t leave it to stand for any
length of time at room temperature or in the
fridge.
• The energy required for defrosting is much
less than for cooking, the microwave causes
the ice formed in the food to melt rather
than heat.
WEIGHT DEFROST
Example: Defrost beef of 500g:
1. Press WEIGHT DEFROST, LED will
display dEF1.
2. Press 5, 0, 0 in order, ‘g’ will light, the range
of defrosting weight is 100g–2000g.
3. Press START/+30 SEC to start defrosting,
‘g’ will go out, time will be displayed and
countdown will start.
TIME DEFROST
Example: To defrost piece of beef in
10 minutes:
1. Press TIME DEFROST, LED will
display dEF2.
2. Press 1, 0, 0, 0 to set defrost time.
3. Press START / +30 SEC to start defrosting.
Time will be displayed and countdown
will start.
AUTO COOK
To enable pre-programmed automatic
functions, press the “AUTO COOK”
button first and then select the corresponding
number pad for the desired auto cook function.
To confirm the desired auto cook function,
corresponding number pad will need to be
pressed twice.
Example: To select Auto Cook Meat function,
input the following steps:
1. Press “AUTO COOK” button
2. Press corresponding number pad “4” to
display “A4”
3. Press number “4” again to confirm the
selection and default weight “150” will be
displayed.
4. Press number “4” until desired weight of the
food item is selected (150, 300, 450
and 600 g)
5. Press START / +30 SEC button to
commence operation