10
FILLING THE WATER TANK
•
Ensure the water filter is securely fitted inside
the tank.
•
Fill the water tank with cold tap water to the
maximum mark on the side of the tank and
slide the water tank back into position at the
back of the machine.
•
Plug the power cord into power outlet and
switch On at power point.
•
Press the POWER button. The POWER
button surround will flash while the machine
is heating. When the correct temperature has
been reached, all the button surrounds on the
control panel will illuminate.
NOTE
Check the water level before use and replace
the water daily. The water tank should be filled
with fresh, cold tap water before each use.
Do not use de-mineralised or distilled water or
any other liquid.
SETTING THE GRIND SIZE
The grind size will affect the rate of water flow
through the coffee in the filter basket and
the flavour of the espresso. When setting the
grind size, it should be fine but not too fine and
powdery.
There are 18 settings on the GRIND SIZE
select dial - The smaller the number, the finer
the grind size. The larger the number, the
coarser the grind size. We recommend you
start at the No. 5 setting and adjust as required.
GRINDING THE COFFEE
•
Fill the hopper with fresh coffee beans.
•
Place the portafilter into the grinding cradle.
•
Insert filter basket required into the
porta-filter.
Press the FILTER SIZE button to select
your filter size (single or double).
SINGLE
FILTER SIZE
DOUBLE
AUTOMATIC DOSING
•
Push and release the portafilter to activate the
grinding switch, then allow the portafilter to
be dosed with fresh ground coffee.
•
To stop the grinding function during single
or double dose, simply press the filter size
button.
BES870_IB_F16.indd 10
16/06/2016 3:18 PM