12
13
The processor incorporates a SAFETY
INTERLOCK SYSTEM that ensures the
unit will not start without the large food
pusher in position. Processing will stop
automatically, once the large food pusher
has been removed from the lid. The
CHUTE FILL MAX graphic indicates the
maximum volume of food to be placed
in the chute for the pusher to activate the
unit.
10.
At the end of processing, always
wait until the blades or discs have
stopped spinning before unlocking
and removing the lid. To remove the
processing lid, ensure the POWER/OFF
button has been pressed, and the cord
is unplugged from the power outlet.
Holding the feed chute and pressing
down fi rmly at the same time, turn the
lid counter-clockwise so that the arrow
graphics are no longer aligned.
NOTE
As a safety feature, the food processor
will automatically switch off when the
lid is unlocked; however, it is good
practice to manually switch off the
food processor using the POWER/OFF
button before removing the lid.
11.
Remove the processing bowl (before
removing blade or discs) by turning it
counter-clockwise until the handle is in
line with the ALIGN HANDLE graphic.
Lift the bowl off the motor shaft.
When removing the discs - carefully
remove by gripping the plastic hub on
the center of the disc and lifting the disc
up and away from the pin on the spindle.
NOTE
Reassemble the food processor by
locking the processing bowl into
position before attaching blade, disc
or lid.
NOTE
Care should be taken when removing
the food from the processing bowl by
ensuring the motor and processing
blade or disc has completely stopped
before disassembling. Ensure the
POWER/OFF button is pressed to
switch the motor off, and unplug the
cord from the power outlet before
removing the lid from the processing
bowl. The processing bowl should then
be unlocked from the motor body, then
the processing blade or disc should be
removed before attempting to remove
the processed food.
ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT
5.
Place the processing lid onto the
processing bowl so the feed chute is
slightly right of the bowl handle and
the arrow graphics are aligned
.
Holding the feed chute and pressing
down fi rmly at the same time, turn
the lid clockwise (as indicated by the
graphic) so the LOCKING TABon the
lid slots into the INTERLOCKING
SAFETY CATCHon the handle. The lid
should be securely locked into position.
NOTE
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
CAUTION
The processing blades (including
the mini bowl blade) and discs are
extremely sharp, handle with care at
all times.
6.
Insert the power plug into a 110/120V
power outlet.
7.
Press the POWER/OFF button to turn
your food processor on. The red light
will illuminate around the POWER /OFF
button to indicate that the processor is on.
Press the START/PAUSE button to switch
the motor on and operate continuously.
NOTE
The food processor will not start
unless the large food pusher is
inserted correctly into place.
Press the POWER/OFF button to
switch the motor off. When short bursts
of power are required, press the PULSE
button and hold down briefl y, release,
then press again. The PULSE action
will automatically stop when the button
is released.
8.
To set the timer, press the
buttons
located to the left of the timing window.
Time will move up by 5 second intervals,
from 0 to 30 seconds. From 30 seconds
to 2 minutes the time will increase in 10
second intervals and from 2 minutes to
9.59 minutes the time will increases in
20 second intervals.
NOTE
If a time is not set, the timer
will automatically count up
during processing.
9.
Once the time is set, press the
START/PAUSE button and the timer
will start to count down.
Ensure the large food pusher is inserted
correctly into place. The food processor
will not start until pusher is in place.
Once the timer has fi nished, the
food processor will stop and go into
STANDBY mode. Three (3) beeps will
sound to indicate that the processing is
complete.
ASSEMBLING YOUR BREVILLE CERTIFIED REMANUFACTURED PRODUCT
