14
5. Press the ON/OFF switch on the control
panel to ON. The juicer will start to operate
at the selected speed. The speed can be
changed at any time during the juicing
process by adjusting the variable speed
control dial.
NOTE
After 3 minutes, the LCD display will
automatically turn off if the ON/OFF switch is
not turned ON, or a speed is not selected.
6. With the motor running, place food into
the feed chute and use the food pusher
to gently guide food down. To extract the
maximum amount of juice, always push the
food pusher down slowly.
NOTE
•
The juicer will automatically stop operating if
the motor is stalled for more than 10 seconds.
This is a safety feature. Either too much food
is being processed at one time or the pieces
are not small enough. Try trimming food,
cutting food into smaller pieces of even size
and/or processing a smaller amount per
batch. To continue juicing, reset the juicer by
pressing the ON/OFF switch on the control
panel to OFF, switch off at power outlet
and remove power cord from power outlet,
then clear the feed chute, finally plug power
cord back into power point and switch on at
power outlet. Turn the appliance back on by
pressing the ON/OFF switch to ON.
•
The juicer is fitted with a safety device
which safeguards against overheating with
excessive loads. If overheating occurs, the
juicer will automatically activate the overload
protection device and the unit will switch
itself off. When the overload protection is
activated, unplug the juicer from the power
outlet for at least 15 minutes to allow the unit
to cool. Then plug juicer into the power outlet
and use as normal.
7. As fruit and vegetables are processed, juice
will flow into the juice jug and the separated
pulp will accumulate in the pulp container.
The pulp container can be emptied during
juicing by turning the juicer OFF at the
control panel and then carefully removing
the pulp container. Replace the empty pulp
container into position before continuing
to juice.
NOTE
•
Do not allow the pulp container to overfill as
this may affect the operation of the appliance.
•
To minimise cleaning, line the pulp container
with a plastic freezer bag to collect the pulp.
Pulp can then be used in other dishes, or as
compost for the garden or discarded.
•
To include the froth in with your juice, simply
remove the lid of the juice jug when pouring
juice into the glass.
USING THE FROOJIE
®
EXTRACTOR
When using the Froojie
®
extractor, puree will
flow into the juice jug. There will be no pulp
extracted into pulp container.
NOTE
Some fruit Froojie
®
may be left in the juice
collector. This is normal. The amount left over
will vary depending on ripeness and hardness
of fruit.
WARNING
Never use fingers, hands or other utensils to
push food down the feed chute or to clear the
feed chute during operation. Always use the
food pusher provided.
Содержание Froojie Juice Fountain BJE520
Страница 1: ...the Froojie Juice Fountain Instruction Book BJE520 ...
Страница 27: ...27 ...