background image

4

BREvILLE RECOMMENdS SAFETy FIRST

At Breville we are very safety conscious. We design and 

manufacture consumer products with the safety of you, our 

valued customer, foremost in mind. In addition we ask that you 

exercise a degree of care when using any electrical appliance 

and adhere to the following precautions.

REAd ALL 

INSTRUCTIONS 

BEFORE USE ANd 

SAvE FOR FUTURE 

REFERENCE

• 

Remove any packaging 

material and promotional 

stickers before using the 

stick mixer for the first time.

• 

Do not place the stick mixer 

near the edge of a bench 

or table during operation. 

Ensure the surface is level, 

clean and free of water, 

flour, etc.

• 

Do not place the stick mixer 

on or near a hot gas or 

electric burner, or where it 

could touch a heated oven. 

• 

If using the stick mixer 

to blend hot food in a 

saucepan over heat, remove 

the saucepan from the 

heat source and ensure 

the power cord and body 

of appliance are also kept 

away from any heat source.

• 

Take care when handling 

the stick mixer, attachments 

and sharp cutting blades, 

when emptying the bowl 

and during cleaning. 

Remember the blade and 

attachments are very sharp 

and should be kept out of 

the reach of children.

• 

Always make sure the stick 

mixer is completely and 

properly assembled before 

operating.

• 

Ensure the stick mixer is 

turned off at the trigger 

switch, the power is 

switched off at the power 

outlet and the cord 

is unplugged from the 

power outlet before 

attempting to attach any  

of the accessories.

• 

Do not use attachments 

other than those provided 

with the stick mixer.

• 

Only use the whisk 

attachment for the recipes 

contained in this instruction 

booklet.

IMPORTANT SAFEGUARdS

Содержание BSB530

































Отзывы: