background image

20

TO USE THE WHISK

For food preparation tips and recipes refer 

to the recipes section. Ensure the whisk is 

completely and properly assembled.

1. 

Place food to be processed into a 

blending jug or a sufficiently large 

mixing bowl or container.

2. 

Insert the plug into a 230/240V power 

outlet and turn the power on.

3. 

Select a speed between 1–15 on the 

speed control dial.

4. 

Place the whisk into food and press the 

trigger switch to turn the whisk on.

5. 

Move the whisk through the ingredients 

with a gentle raising and lowering action 

until desired texture is achieved.

6. 

Switch off the motor by releasing the 

trigger switch before lifting the whisk 

out of the bowl. Switch off at the power 

outlet and remove the power plug.

TO dETACH THE WHISK

Ensure the trigger switch is released, the 

power is turned off at power point and the 

appliance is unplugged. Hold the motor 

body with one hand, and using thumb and 

finger of the other hand, press on the two 

EJECT buttons on either side of the motor 

body. Pull the motor body away from the 

whisk to detach.

ASSEMBLy & OPERATION 

RECOMMENdATIONS WHEN USING 

THE WHISK ATTACHMENT

• 

Do not allow the whisk to hit the bottom 

or sides of mixing bowl while the 

appliance is in operation, as this may 

damage the whisk.

• 

To incorporate air into the ingredients 

when whisking, use a sufficiently deep, 

wide container and move the whisk 

through the ingredients with a gentle 

raising and lowering action.

• 

Release the trigger switch and ensure 

the whisk has completely stopped 

turning before removing the whisk from 

the food during operation.

• 

Place the mixing bowl on a damp cloth 

during whisking. This will keep the 

mixing bowl stable.

• 

Always use fresh chilled cream and  

fresh eggs at room temperature to 

achieve greater and more stable volume 

when whisking.

• 

Always ensure the whisk and mixing 

bowl are completely clean and free of fat 

before whisking egg whites.

• 

It is recommended to use the highest 

speed when whisking egg whites  

and cream.

STORAGE

Before storage, turn the power off at 

the power outlet and then remove the 

plug. Ensure the appliance is clean and 

completely dry. 
Attach/assemble chopper bowl lid to the 

chopper bowl, place chopper bowl inside 

blending jug, attach storage lid to the 

bottom of the blending jug (non-slip base).

Содержание BSB530

































Отзывы: