10
Fruit/Vegetable
Speed
Kale
7 – 8
Kiwi fruit (peeled , optional)
2 – 3
Mangoes (peeled, stone
removed)
2 – 3
Melons (peeled)
1 – 2
Nectarines (stone removed)
3 – 4
Peaches (stone removed)
3 – 4
Pears (stalks removed)
9 – 10
Pineapple (peeled, optional)
9 – 10
Plums (stone removed)
3 – 4
Spinach
7 – 8
Tomatoes
1 – 2
Watermelon (peeled)
1 – 2
Functions
1. Wash your selection of fruit and/
or vegetables. Prepare fruits
according to charts above.
2. Ensure the juicer is correctly assembled
and clean. Ensure you place the juice
jug under the spout before juicing.
3. Plug the power cord into a 230/240V
power outlet and then turn the power on
at the outlet. The light surrounding the
START/STOP button will illuminate.
NOTE
The light will be illuminated for 2 minutes
before fading into sleep mode. The light
will come back on by activating any of the
controls.
4. Use the speed selector table as a guide
for juicing different fruit and vegetables.
Push the START/STOP button and
the unit will automatically start.
5. With the motor running, place food into
the feed chute using the food pusher,
gently guide food down the feed chute.
Do not exert excess pressure. To extract
the maximum amount of juice, always
push the food pusher down slowly.
6. As fruits and vegetables are processed, juice
will flow into the juice jug and the separated
pulp will accumulate in the pulp container.
If full, the pulp container can be emptied
while juicing by turning the juicer
off, removing and emptying the pulp
container, and replacing the empty
pulp container back onto the juicer.
NOTE
Do not allow the pulp container to over fill
as this may affect the operation of appliance.
SELF-RESET OVERHEATING
PROTECTION
The juicer is fitted with a self-resetting
safety device which safeguards against
overheating on the motor with excessive
loads. If overheating occurs, the juicer will
automatically activate the overheating
protection device and the motor will
switch itself off. If this occurs, the light
surrounding the START/STOP button will
flash red. When the overheating protection
is activated, unplug the juicer from power
outlet for at least 15 minutes to allow the
unit to cool. Then plug juicer into the power
outlet and use as normal.
ELECTRONIC PROTECTION
The juicer will automatically stop operating
if the motor is stalled. This is an electronic
safety feature. Either too much food is being
processed at one time or the pieces are not
small enough. Try trimming food, cutting
food into smaller pieces of even size and/
or processing a smaller amount per batch.
If this occurs, the light surrounding the
START/STOP button will flash red. To
continue juicing, turn the power OFF at the
power outlet, clear the feed chute, finally
turn the appliance back on by pressing the
START/STOP button to ON.
