Breville BIS200 Crazy Snow, Инструкция по применению и книга рецептов

Страница: 9 / 12

Step 6
Turn the power off at the power outlet and remove
the plug.
Step 7
Remove the ice collector and dispense shaved ice into
suitable bowls or cups. See recipe ideas.
Step 8
Repeat with more ice cubes if desired. Do not operate
the Crazy Snow for longer than 5 minutes – unplug and
allow to cool for 30 minutes.
Step 1
Before cleaning, turn the power off at the power
outlet and then remove the plug.
Step 2
Disassemble the Crazy Snow following the
instructions provided.
Step 3
The lid housing, ice stirring paddles, ice collector and
ice shaving blade should be washed in warm soapy
water. Rinse and dry thoroughly making sure there is
no residual water that can run into the motor body.
Do not wash any parts in the dishwasher.
Step 4
Wipe the ice shaving blade body and motor body with
a damp cloth only, dry thoroughly. Do not use abrasive
cleaners or steel wool. When cleaning the area around
the ice shaving blade, use caution. Either remove the
ice shaving blade or keep fingers away from this area
as the blade is extremely sharp.
Storage
Before storage, turn the power off at the power outlet
and then remove the plug. Ensure the appliance is
clean and completely dry. Store upright on a bench
or in a convenient cupboard. Do not store any heavy
objects on top of the Crazy Snow Ice Shaver.
DO NOT WASH ANY PARTS OF THE CRAZY
SNOW IN THE DISHWASHER.
CARE, CLEANING & STORAGE
THE ICE SHAVING BLADE IS EXTREMELY
SHARP, HANDLE WITH CARE. KEEP FINGERS
AWAY FROM THE BLADE AT ALL TIMES.
NOTE!!
The Crazy Snow may be noisy in operation but this
is caused by the processing of the ice cubes.