Breville BES450, Инструкция

Страница: 16 / 24

16
Care & Cleaning
CLEAN & DESCALE CYCLE
When descale cycle counter reaches 1500,
the 2 Cup button will continuously flash;
indicating machine will need cleaning and
descaling.
NOTE
The machine will indicate that it requires
cleaning and descaling when the 2 CUP button
flashes continuously. Pressing any of buttons
will cancel the alert and return the machine to
ready mode.
WARNING
It is NOT recommended to ignore the clean
cycle warning because after regular use, hard
water can cause mineral build-up in and on
many of the inner functioning components,
reducing the brewing flow, brewing
temperature, power of the machine, and the
taste f the espresso.
WARNING
Do not immerse the power cord, power plug
or appliance in water or any other liquid.
The water tank should never be removed or
completely emptied during descaling.
TO PERFORM A CLEAN &
DESCALE CYCLE
1. Empty the drip tray and re-insert firmly into
position on the machine.
2. Fill the water tank to the DESCALE line
indicated and add the descaling agent to
the water.
DESCALE
1000
2
L
68oz
3. Place a 2L container under the group head
and steam wand.
2 L
68oz
DESCALE
1000
+
0.5s
5s
OR
&
2
L
68oz
MAX
4. Press the 2 Cup and Steam buttons
simultaneously for 5 seconds to start
descaling.
2
L
68oz
DESCALE
1000
+
0.5s
5s
OR
&
2
L
68oz
MAX
NOTE
The 2-Cup button will flash throughout the
cycle.
5. Once the descale solution has been used up,
the descale mode will pause.
6. Rinse and refill the water tank to the MAX
line and empty the waste water container,
then replace both parts on to the machine to
proceed onto the rinse cycle.