6
7
know your Breville Avance
®
2 litre Cordfree kettle
Removable scale filter
operating your Breville Avance
®
2 litre Cordfree kettle
Safety locking hinged lid
2 Litre capacity
Dual water windows
Fast boil 2400 watt
concealed element
Multi-directional
cordfree base
with cord storage
On / Off switch with
safety auto cut off
and boil dry protection
Before fIrSt uSe
Remove and safely discard any packaging
material or promotional labels before using your
kettle for the first time. It is recommended before
the first use to fill the kettle to the maximum
level with cold tap water, bring to the boil then
discard the water. Your kettle will only operate
when positioned on the power base with the
ON/OFF switch in the ‘ON’ position. The kettle
will automatically switch ‘OFF’ once the water has
boiled.
operAtIoN of your kettle
To fill the kettle with water, remove it from
the power base and open the lid by pulling
back the lid release latch. Fill with the desired
amount of water.
Ensure the lid is closed and locked securely
into place. Position the kettle firmly onto the
power base. Plug the power supply cord into a
230/240V power outlet and switch ‘On’.
Press the ON/OFF switch down to the ON
position. The power ON light will illuminate.
Always fill the kettle with water between the
minimum (MIN) and maximum (MAX) marks on
the water window on the kettle. Too little water
will result in the kettle switching. Filling above the
maximum mark (MAX) may result in boiling water
splashing from the kettle.
Do not remove the kettle from the power base
during operation. Ensure the kettle has switched to
the OFF position, after the water has boiled, before
removing the kettle from the power base.
.
2.
3.
The kettle will automatically switch to the
OFF position when the water has boiled. Lift
the kettle from the power base and pour
the water. Take care to hold the kettle level,
especially when filled to the maximum (MAX)
level. To re-boil it may be necessary to wait
for a few seconds to allow the control to reset.
If further heating of the kettle is not required,
switch off at the power outlet, unplug the
power cord and empty the water from the
kettle. Replace the kettle onto the power base
and close the lid.
This kettle must be used with the power base
supplied. Use caution when pouring water from your
kettle as boiling water and steam will scald. Do not
pour the water too quickly.
WArNINg: do Not opeN tHe lId
durINg ANd After operAtIoN.
tHIS mAy reSult IN BoIlINg WAter
SplASHINg from tHe kettle. pour
All tHe Hot WAter from tHe
kettle Before opeNINg tHe lId to
refIll.
WArNINg: tHIS ApplIANCe IS
deSIgNed for BoIlINg of drINkINg
QuAlIty WAter oNly. Never uSe It
to HeAt or BoIl ANy otHer lIQuIdS
or foodStuffS. tHe lId SHould
AlWAyS Be loCked fIrmly IN plACe
IN tHe CloSed poSItIoN Before uSe.
4.
5.