27
PROBLEM/Error Code
Displayed on Screen
POSSIBLE CAUSE
WHAT TO DO
Slow water flow rate
•
Aging of pump or inlet at the
base of the unit is clogged
•
Contact Breville Customer Service
Small amounts of black
particles in water tank
•
These are small pieces of carbon
from the filter. These carbon
particles are food grade and are
not harmful. They will not impair
the performance of your filter
or unit.
•
Flush your water unit and water filter
cartridge. Refer to ‘Flushing the Breville
AQUASTATION™’ (page 12) and
‘Preparing the Activ360 Filter' (page 12)
NOTE:
Some carbon fibre residual may
still be present after flushing the water
unit and filter.
START/STOP
Button does not respond
•
The unit is not connected to the
power
•
Plug in to a usable power outlet and turn
power on.
Leakage from water tank
•
The water tank is filled beyond
the maximum water level
•
Tank is not firmly pushed into
position
•
Ensure water is only up to the MAX
water level marking. If leakage
continues, please contact Breville
Customer Service
•
Replace the water tank, pressing down to
ensure that it is properly positioned and
attached to the unit
Odd taste of the water
•
The filtered water is not used for
a long time
•
The filter has reached end of life
•
Discard the remaining water in the
water tank and refill with fresh tap water.
Depending on the length of time, the
filter may require flushing again.
•
Replace with new filter
"FILTER RESET" flashing
on LCD screen.
•
Filter needs to be changed or
filter reset has not been actioned
•
Change the filter if required, turn the
FUNCTION dial until the indicator on
the LCD screen reaches the FILTER
RESET function and press ADJUST/
SET button once to reset.
LO
•
Water temperature in water tank
less than 5 °C
•
Fill water between 5 °C to 40 °C
HI
•
Water temperature in water tank
is higher than 40 °C
•
Fill water between 5 °C to 40 °C
E03
•
Heating element malfunction
•
Contact Breville Customer Service
E04
•
Dry boil protection
•
Turn the unit off at the power and
Contact Breville Customer Service
E05
•
Cooling Tank NTC open or short
•
Contact Breville Customer Service
E06
•
Altitude Sensor Failure
•
You can continue to use the appliance,
however, contact Breville Customer
Service as a change in altitude will
impact performance.
If you cannot remedy problems by using the troubleshooting chart above, contact Breville Customer Service.
Troubleshooting