19
flash on the screen. Rotate the FUNCTION
dial clockwise or anticlockwise to adjust
the temperature between 5°C to 15°C, then
press the FUNCTION dial to confirm the
selection.
2. The 250ml default volume will now flash
on the screen. Rotate the FUNCTION dial
clockwise or anticlockwise to adjust the
volume, then press the FUNCTION dial
to confirm the selection. The volume icon
indicator will appear on the LCD screen
to visually show you the amount you are
about to dispense.
3. Press START/STOP button once, COLD
will flash on the LCD screen, the blue LED
light ring will flash continuously to indicate
that the water if the chilling chamber is not
at the set temperature.
4. Once the correct temperature has been
reached, the COLD button light will stop
flashing and illuminate solid blue indicating
that the water dispenser is now ready to
dispense filtered chilled water at the set
temperature and volume.
5. Press START/STOP button once again to
start dispensing filtered COLD water at the
set volume. COLD will continue flashing
on the LCD screen, the water droplet light
will illuminate white to indicate water is
dispensing, and the FUNCTION dial light
will turn off.
6. Water will automatically stop dispensing
once the set volume has been reached and
the water droplet light will turn off. The unit
will return to standby mode.
ECO MODE
To put the unit in eco mode, in any setting,
press and hold the COLD button for 5 seconds
to deactivate the compressor, the COLD light
ring will turn off and the unit will sound a long
beep. The hot and ambient function can still be
used. Press the COLD button once to activate
exit eco mode.
Hot Menu - Black Tea, Coffee,
White Tea & Green Tea
1. Press the HOT water button once; the red
light around the HOT button will illuminate
and HOT will display on the screen. The hot
beverage programmed menu will appear on
the screen with the indicator beside the first
menu option. The default temp and volume
will appear on the LCD screen.
NOTE
The water droplet white light will flash until
START/STOP is pressed to start dispensing.
2. Turn the FUNCTON dial to scroll through
the pre-set menu options. The top digits
on the LCD screen indicate the hot water
temperature and the bottom digits indicate
the volume of water to be dispensed.
3. Press START/STOP button once to dispense
at the default volume (250ml), or to adjust
volume, press the FUNCTION dial once.
The Volume digits on the LCD screen will
begin to flash. Rotate the FUNCTION dial
clockwise or anticlockwise to adjust the
volume, then press the FUNCTION dial to
confirm the selection.
4. Press START/STOP button once to begin
dispensing the filtered hot water at the set
temp and volume. The red light around the
HOT button will be remain on, the selected
menu option and the word HOT will flash on
the LCD screen. The water droplet white light
will illuminate solid while water is dispensing.
5. Water will automatically stop dispensing
once the set volume has been reached. The
red light around the HOT button and the
water droplet light will both turn off. The unit
will return to standby mode.
NOTE
This appliance is not calibrated for commercial
or scientific use. Temperatures may vary
by +/-2°C, which is within range for optimal
brewing for each tea menu. Hot temperatures are
indicative of temperature at the heating element,
not at the spout or in the cup.