10
NOTES
•
Hot water temperature settings are measured
at the heating element, not the dispensed
temperature at the spout or in the cup.
•
Cold water temperature settings are measured
in the chilling chamber, not the dispensed
temperature at the spout or in the cup.
•
When dispensing ambient water, if START/
STOP is not pressed to stop water flow,
dispensing will automatically stop after 60
seconds.
•
Ambient water temperature will vary. The
temperature dispensed will be influenced by
the external factors surrounding the unit itself.
An increase in the air temperature will cause
water tank temperature to increase as well.
•
If the water temperature in the tank becomes
too warm, discard and replace with cold tap
water. Water temperature in the tank should
not be dispensed if above 40°C.
HOT &
COLD FAVOURITE BUTTONS
The HOT & COLD FAVOURITE settings allow you to save your most used setting.
At the press of a button, your favourite program can be accessed time after time.
LCD SCREEN PROGRAM TABLE
Function
Water
Dispensing
Flow Rate
per Min
^Preset
Temp °C
^Temp
Range °C
Temp +/-
Increments
Preset
Volume
MLS
Volume
Range
MLS
/- Increments
from 100-250mL increase
by 25mL, from 250-500mL
increase by 50mL, from
500mL+ increase by 100mL
Cold
1L
5
5 to 15
1°C
250mL~ 100-500
25mL
Ambient#
1L
Temp of Water
inside Water
Tank
Temp of Water
inside Water
Tank
N/A
250mL~ 100-500
25mL
Black Tea
400mL
100°C
N/A
N/A
250mL 100-500
25mL
Coffee
400mL
95°C
N/A
N/A
250mL 100-500
25mL
White Tea
400mL
85°C
N/A
N/A
250mL 100-500
25mL
Green Tea
400mL
80°C
N/A
N/A
250mL 100-500
25mL
Custom
400mL
N/A
45-100
5°C
250mL 100-1200
25mL
^Temperature is measured at the heating element and chilling chamber not from the spout.
#Ambient water temperature will vary.
~Without setting volume, unit will automatically stop pouring after 1 minute.
LCD SCREEN DISPLAY MENU
COLD
Appears on the screen only when the COLD
button has been selected
HOT
Appears on the screen only when the HOT
button has been selected.
CUP VOLUME INDICATOR
Appears on the screen only when volume is
being set to visually show the level of water
that will be dispensed into the cup.
AMBIENT
Displays on the screen as the default setting
when in standby mode and when dispensing
ambient filtered water.
FILTER RESET
Appears on the screen as a reminder to change
the filter cartridge once the filter life timer has
counted down.