breviglieri b55s, Эксплуатация и техническое обслуживание, запасные части

Страница: 16 / 64

- 16 -
b55s
- When the user has failed to comply with the instructions in this
manual.
Damage deriving from negligence, carelessness, bad and im-
proper use of the machine or incorrect manoeuvres by the opera-
tor are also excluded from the warranty. Removal of the safety
devices with which the machine is equipped shall automatically
void the warranty and relieve the Manufacturer from all liability in
merit.
The warranty also becomes void if spurious spare parts are used.
Even when covered by the warranty, the machine must be re-
turned Carriage Free.
1.3 DESCRIPTION OF THE MACHINE AND USE
Steerage hoe b55s bears «CE» marking in compliance with
the European Union standards described in Directive 98/37/
EC and successive modifications, as indicated in the decla-
ration of conformity with which each machine is provided.
1.3.1 DESCRIPTION
The machine mainly consists of a metal framework housing the
central hitch with three-point linkage (1 Fig. 1) and a bladed rotor
installed in the lower part (11 Fig. 1) driven by a chain or gears
situated in the side housing (7 Fig. 1). The power required to op-
erate the machine is transmitted by the tractor via a driveline (with
CE marking) which meshes with the gearbox/final drive unit in a
central position (5 Fig. 1), and is subsequently transmitted to the
gears by a drive shaft.
KEY to Fig. 1
A Front part
B Rear part
C Left side
D Right side
1 Three-point hitch linkage
2 Upper 3-point hitch
3 Machine lifting point
4 Driveline support
5 Final drive unit
6 Hood adjuster ram
7 Side transmission unit
8 Safety guards
9 Hood
10 Bearing stand
11 Bladed rotor
12 Lower 3-point hitch
13 Power take-off
14 Driveline shield
15 Work depth adjuster skid
16 Skid adjuster bolt
17 Identification plate
1.3.2 USE
Steerage hoe b55s has solely been designed for use in agri-
culture in order to work and break up the soil.
One single operator seated on the tractor is able to carry out
the various tillage operations.
Any other use of the machine differing from the explanations
given in this manual relieves for Manufacturer from all and
every liability for deriving damage to persons, animals or
property.
1.4 IDENTIFICATION
Each machine is provided with an identification plate (17 Fig. 1)
with the following data:
- Manufacturer’s name and address;
- «CE» marking;
- A) Machine model;
- B) Machine version;
- C) Serial number;
- D) Weight (in Kg);
- E) Year of manufacture.
The data on the identification plate of the machine should be cop-
ied into the last page of this manual and must always be stated
when spare parts and/or assistance are required.
Standard machine supply includes:
- Operation and maintenance manual for the machine;
- «CE» declaration of conformity.
1.5 NOISE LEVEL
The sound level has been measured in compliance with
current standards, with the following results:
- Acoustic pressure LpAm (A) .......................... dB 83.6
- Acoustic power LwA (A) ................................. dB 98.5
1.6 TECHNICAL SPECIFICATIONS
Machine width Tines Kg/max
Model HP Kg work. dimens. N° Depth (*)
SECTION 2
General safety notes
2.1 SAFETY NOTES
The user must inform his personnel about the risks deriving from
accidents, about the safety devices installed to safeguard the
operator and about the general accident-preventing regulations
established by the Directives and by the laws in force in the coun-
try where the machine is used.
It is therefore essential for operators to carefully read this manual,
particularly the safety notes, and to pay great attention to opera-
tions which could be particularly hazardous.
The Manufacturer declines all and every liability for failure to
comply with the safety and prevention regulations given in
this manual.
Pay attention to this symbol when it appears in the manual. It
indicates a possible danger situation.
b55s 145
25-35 275 145 163 28 5-15 275
b55s 165 30-50 295 165 183 32 5-15 295
b55s 185 35-60 315 185 203 36 5-15 315